<< Click to Display Table of Contents >> DA Case Summary Speed |
The Belt Speed summary chart is an X-Y chart of the belt velocity at one selected point on the conveyor, for selected operating case(s) during the simulated period of starting, running and stopping.
•Selecting the Case Summary menu item.
•Clicking the Speed tab icon.
•The plot point set defines the points which can be selected for plotting. These can be edited. They are the same points displayed in the individual case simulation output display and charts.
•Select the point from the "Selected Plot Point:" drop-down list.
A table of the minimum and maximum values for each case is displayed below the chart with the descriptions color coded to the lines. Clicking on the box next to a specific case description determines whether the line is displayed on the graph.
•If it is colored, the line is shown; if it is empty (white) then it is not shown.
•If are many cases and want to display just one of them, right-click on the color box of the desired case to show only that line. Attempting to hide the only showing line results in all lines being shown again.
The plot begins with the starting sequence and then goes to the stopping sequence. The chart shading indicates the transition point. This range can be reduced by dragging the scroll bar between the chart and time axis labels.
If the stating simulation time is long enough, the plot at the end of the starting data should be constant and represent the running condition.
The thin gray line represent the planned full speed (from BA).
See Also: Plot Points, Case Summary Output